HSCS: Smart Contract

Hello World sequence: Write a smart contract in Solidity, compile it, then use Hedera Smart Contract Service (HSCS) to deploy it and interact with it.

What you will accomplish

Prerequisites

Before you begin, you should have completed the following Hello World sequence:

Create and fund account

Get started: Set up project

To follow along, start with the main branch, which is the default branch of the repo. This gives you the initial state from which you can follow along with the steps as described in the tutorial.

You should already have this from the "Create and Fund Account" sequence. If you have not completed this, you are strongly encouraged to do so.

Alternatively, you may wish to create a .env file and populate it as required.

In the terminal, from the hello-future-world directory, enter the subdirectory for this sequence.

cd 03-hscs-smart-contract-ethersjs/

Reuse the .env file by copying the one that you have previously created into the directory for this sequence.

cp ../00-create-fund-account/.env ./

Check that you have copied the `.env` file correctly

To do so, use the pwd command to check that you are indeed in the right subdirectory within the repo.

pwd

This should output a path that ends with /hello-future-world/03-hscs-smart-contract-ethersjs. If not, you will need to start over.

/some/path/hello-future-world/03-hscs-smart-contract-ethersjs

Next, use the ls command to check that the .env file has been copied into this subdirectory.

ls -a

The first few line of the output should look display .env. If not, you'll need to start over.

.
..
.env

Next, install the dependencies using npm. You will also need to install a Solidity compiler, using the --global flag.

npm install && npm install --global solc@0.8.17

Solidity is a programming language that was designed specifically for writing smart contracts in. The Solidity compiler outputs bytecode that can be run by an Ethereum Virtual Machine (EVM) implementation; including Hyperledger Besu's EVM, which powers Hedera Smart Contract Service.

Note that although the npm package is named solc, the executable exposed on your command line is named solcjs.

Then, open both of the following files in a code editor, such as VS Code.

my_contract.sol
script-hscs-smart-contract-ethersjs.js

Write the smart contract

An almost-complete smart contract has already been prepared for you, my_contract.sol. You will only need to make one modification (outlined below) for it to compile successfully.

Step 1: Get the name stored in mapping

Within the greet() function, we would like to access the names mapping and retrieve the name of the account that is invoking this function. The account is identified by its EVM account alias, which is available as msg.sender within the Solidity code.

my_contract.sol

        string memory name = names[msg.sender];

Note: This smart contract has two functions, introduce and greet. You will invoke both of them later on.

Compile the smart contract

Once you have completed writing the smart contract in Solidity, you will need to compile it using the Solidity compiler installed earlier.

Invoke the compiler on your Solidity file. Then list files in the current directory.

solcjs --bin --abi ./my_contract.sol
ls

You should see an output similar to the following:

my_contract.sol
my_contract_sol_MyContract.abi
my_contract_sol_MyContract.bin

The .abi file contains JSON and describes the interface used to interact with the smart contract.
The .bin file contains EVM bytecode, and this is used in the deployment of the smart contract.

Note that while the .abi file is human-readable, the .bin file is not intended to be human-readable.

Configure RPC Connection

Sign up for an account at auth.arkhia.io/signup. If prompted, click on the link in your confirmation email.
Click on the +CREATE PROJECT button in the top-right corner of the Arkhia dashboard.

Fill in whatever you like in the modal dialog that pops up.

Click on the "Manage" button on the right side of your newly created project.

Now, you should see the project details.

Under "Network", select "Hedera Testnet".
Copy the "JSON-RPC Relay" field.
In the "Security" section, copy the "API Key" field.

In the .env file, edit the property with the key RPC_URL, to replace YOUR_JSON_RPC_URL with the "JSON-RPC Relay" value, followed by a / character, and finally, the "API key" value that you have just copied.

For example, if the JSON-RPC field is https://pool.arkhia.io/hedera/testnet/json-rpc/v1, and if the API key field is ABC123, the line in your .env file should look like this:

.env

RPC_URL=https://pool.arkhia.io/hedera/testnet/json-rpc/v1/ABC123

Note: Ensure that you have a / just before the API key.

Alternative RPC configuration

Arkhia is one of multiple options for JSON-RPC connections. This tutorial covers the available options: How to Connect to Hedera Networks Over RPC.

Write the script

An almost complete script has already been prepared for you, script-hscs-smart-contract-ethersjs.js. You will only need to make a few modifications (outlined below) for it to run successfully.

Step 2: Prepare smart contract for deployment

Initialize an instance of ContractFactory from EthersJs.

script-hscs-smart-contract-ethersjs.js

    const myContractFactory = new ContractFactory(
        abi, evmBytecode, accountWallet);

Note: The ContractFactory class is used to prepare a smart contract for deployment. To do so, pass in the ABI and bytecode output by the Solidity compiler earlier. Also, pass in the accountWallet object, which is used to authorize transactions and is needed for the deployment transaction.

Upon preparation, it sends a deployment transaction to the network, and an instance of a Contract object is created based on the result of the deployment transaction. This is stored in a variable, myContract, which will be used in the next steps. This has already been done for you in the script.

Step 3: Invoke a smart contract transaction

The introduce function requires a single parameter of type string, and changes the state of the smart contract to store this value. Enter your name (or nickname) as the parameter. For example, if you wish to use "bguiz", the invocation should look like this:

script-hscs-smart-contract-ethersjs.js

    const myContractWriteTxRequest = await myContract.functions.introduce('bguiz');

Step 4: Invoke a smart contract query

In the previous step, you changed some state of the smart contract, which involved submitting a transaction to the network. This time, you are going to read some state of the smart contract. This is much simpler to do as no transaction is needed.

Invoke the greet function and save its response to a variable, myContractQueryResult. This function does not take any parameters.

script-hscs-smart-contract-ethersjs.js

    const [myContractQueryResult] = await myContract.functions.greet();

When invoking functions in a smart contract, you may do so in two different ways:

With a transaction → Smart contract state may be changed.
Without a transaction → Smart contract state may be queried but may not be changed.

Run the script

In the terminal, run the script using the following command:

node script-hscs-smart-contract-ethersjs.js

You should see output similar to the following:

accountId: 0.0.1201
accountAddress: 0x7394111093687e9710b7a7aEBa3BA0f417C54474
accountExplorerUrl: https://hashscan.io/testnet/address/0x7394111093687e9710b7a7aEBa3BA0f417C54474
myContractAddress: 0x9A6856897a72E790Ae765bFF997396199BDf1B72
myContractExplorerUrl: https://hashscan.io/testnet/address/0x9A6856897a72E790Ae765bFF997396199BDf1B72
myContractWriteTxHash: 0x32684e8d8e60126e171db968a4b20153ba96a40920a036dbebb48e19fb74664d
myContractWriteTxExplorerUrl: https://hashscan.io/testnet/transaction/0x32684e8d8e60126e171db968a4b20153ba96a40920a036dbebb48e19fb74664d
myContractQueryResult: Hello future - bguiz

Open myContractExplorerUrl in your browser and check that:

The contract exists
Under the "Contract Bytecode" section, its "Compiler Version" field matches the version of the Solidity compiler that you used (0.8.17) (2)
Under the "Recent Contract Calls" section, There should be two transactions:
- The transaction with the earlier timestamp (bottom) should be the deployment transaction. (3A)
  - Navigate to this transaction by clicking on the timestamp.
  - Under the "Contract Result" section, the "Input - Function & Args" field should be a relatively long set of hexadecimal values.
  - This is the EVM bytecode output by the Solidity compiler.
  - Navigate back to the Contract page (browser ⬅ button).
- The transaction with the later timestamp (top) should be the function invocation transaction, of the introduce function. (3B)
  - Navigate to this transaction by clicking on the timestamp.
  - Under the "Contract Result" section, the "Input - Function & Args" field should be a relatively short set of hexadecimal values.
  - This is the representation of
    the function identifier as the first eight characters (e.g. 0xc63193f6 for the introduce function), and
    the input string value (e.g. 0x5626775697a0 for bguiz).
  - Navigate back to the Contract page (browser ⬅ button).

Additional checks

The steps above are sufficient to check that you have deployed and interacted with the same contract successfully. You may optionally wish to perform these additional checks as well.

Open myContractWriteTxExplorerUrl in your browser. This should be the same page as "the transaction with the later timestamp" in 3B from the previous checks. Check that:

The transaction exists
Its "Type" field is "ETHEREUM TRANSACTION"
Under the "Contract Result" section, its "From" field matches the value of accountId
Under the "Contract Result" section, its "To" field matches the value of myContractAddress

Complete

Congratulations, you have completed the Hedera Smart Contract Service Hello World sequence! 🎉🎉🎉

You have learned how to:

Next Steps

Now that you have completed this Hello World sequence, you have interacted with Hedera Smart Contract Service (HSCS). There are other Hello World sequences for Hedera File Service (HFS), and Hedera Token Service (HTS), which you may wish to check out next.

You may also wish to check out the more detailed HSCS workshop, which goes into greater depth.

Cheat sheet

Skip to final state

The repo, github.com/hedera-dev/hello-future-world, is intended to be used alongside this tutorial.

To skip ahead to the final state, use the completed branch. You may use this to compare your implementation to the completed steps of the tutorial.

git fetch origin completed:completed
git checkout completed

Alternatively, you may view the completed branch on Github: github.com/hedera-dev/hello-future-world/tree/completed/03-hscs-smart-contract-ethersjs

Writer: Brendan Editors: Abi, Michiel, Ryan, Krystal

PreviousHTS: Fungible Token NextHFS: Files

Last updated 8 months ago